BAG FILTER 9"/13"

Inline Bag Filter — 30 BAR, 4" OD × 9" or 13" Bags

The Bag Filter is designed for overspray recycling systems and large-volume low-pressure filtration. 30 BAR max working pressure. Available in 4" OD × 9" and 4" OD × 13" bag sizes. 304 SS housing with PTFE sealing. High-capacity bag filtration for paint recirculation, overspray recovery, and bulk transfer systems. CE & ATEX certified.

Request Quote ← All Accessories

CE CertifiedATEX30 BAR9" & 13"

Technical Specifications

Max Working Pressure	30 BAR
Bag Size — Option 1	4" OD × 9"
Bag Size — Option 2	4" OD × 13"
Housing Material	304 SS
Sealing	PTFE
Application	Overspray recycling, large-volume filtration
Certification	CE · ATEX

Key Features

30 BAR max working pressure for low-pressure systems

Available in 9" and 13" bag lengths for different capacities

4" OD standard bag size — widely available replacements

304 SS housing — maximum corrosion resistance

PTFE sealing for solvent resistance

Ideal for overspray recycling and paint recirculation systems

CE & ATEX certified — safe for hazardous area use

FAQs — BAG FILTER 9"/13"

What is the bag filter used for?

The bag filter is primarily used in overspray recycling systems and large-volume paint recirculation. It captures paint particles from recycled overspray before the material is reintroduced to the system, and for bulk paint transfer filtration.

What is the difference between 9" and 13" bags?

The 13" bag provides a larger filtration area and longer service life before replacement. Use 9" for smaller systems or where space is limited. Use 13" for high-volume continuous production where longer change intervals are needed.

How often should bags be replaced?

Replace bags when differential pressure increases or flow rate drops. For overspray recycling systems, bag life depends on overspray volume. Inspect bags at each production shift.

BAG FILTER 9"/13"

Technical Specifications

Key Features

FAQs — BAG FILTER 9"/13"

Need This Accessory?